The fine dust masks of the BLS-FlickIt series approved according to EN 149:2001+A1 2009 are available in the protection levels FFP1, FFP2 and FFP3 with and without exhalation valve and are partly reusable. All models are individually packaged and can be prepared without touching the inner mask. The masks are ready for use with a simple hand movement. Shelf life 10 years.

FEATURES

EOLO® EXHALATION VALVE
An ultralight membrane concentrates the exhaled air into two zones of maximum aperture, 30% wider than before. With these improvements breathing resistance decreases significantly.

FACEPIECE
Large surface guarantees greater coverage of the user’s face and lower breathing resistance.

NOSECLIP
Internal, placed between two layers of fabric so as to reduce the exposed metal parts to a minimum.

FOLDED
Allow the respirator to be pocket sized and able to be distributed with alternative solutions such as vending machines.

AVAILABLE WITH ACTIVATED CARBON
An activated carbon layer is added to the respirator to protect from nuisance odours caused by gases and vapours, both organic and acidic, and ozone in concentrations below the threshold limit value (TLV).

ALL MODELS WITH SINGLE PACK
It allows maintaining a high level of hygiene combined with the possibility to unfold the device without touching the inner mask in direct contact with the face.
article number model
Flick-P3VR FFP3 R D, with exhalation valve, single-packed, folded flat
Flick-P1 FFP1 NR D, without exhalation valve, single-packed, folded flat
Flick-P1V FFP1 NR D, with exhalation valve, single-packed, folded flat
Flick-P2 FFP2 NR D, ohne Ausatemventil, einzeln verpackt, flach gefaltet
Flick-P2V FFP2 NR D, with exhalation valve, single-packed, folded flat
Flick-P2VA FFP2 NR D, with exhalation valve, activated carbon layer,single-packed, folded flat
BLS
Flick-P3VR
Flat folded disposable mask in protection levels FFP1, FFP2 and FFP3, with and without exhalation valve, reusable depending on model, optionally with activated carbon. The mask can be prepared without touching the inner mask. Ready to use with a simple hand movement. Shelf life 10 years.
The fine dust masks of the BLS-FlickIt series approved according to EN 149:2001+A1 2009 are available in the protection levels FFP1, FFP2 and FFP3 with and without exhalation valve and are partly reusable. All models are individually packaged and can be prepared without touching the inner mask. The masks are ready for use with a simple hand movement. Shelf life 10 years.

FEATURES

EOLO® EXHALATION VALVE
An ultralight membrane concentrates the exhaled air into two zones of maximum aperture, 30% wider than before. With these improvements breathing resistance decreases significantly.

FACEPIECE
Large surface guarantees greater coverage of the user’s face and lower breathing resistance.

NOSECLIP
Internal, placed between two layers of fabric so as to reduce the exposed metal parts to a minimum.

FOLDED
Allow the respirator to be pocket sized and able to be distributed with alternative solutions such as vending machines.

AVAILABLE WITH ACTIVATED CARBON
An activated carbon layer is added to the respirator to protect from nuisance odours caused by gases and vapours, both organic and acidic, and ozone in concentrations below the threshold limit value (TLV).

ALL MODELS WITH SINGLE PACK
It allows maintaining a high level of hygiene combined with the possibility to unfold the device without touching the inner mask in direct contact with the face.
Universalgröße
White
White
EN 149:2001+A1 2009
Carton
16
Box
5,3
10
Italy
Produkt ID: 1541523